Electrospinning Academic News

Argon and Argon–Oxygen Plasma Surface Modification of Gelatin Nanofibers for Tissue Engineering Applications 2021-03-15

In the present study, we developed a novel approach for functionalization of gelatin nanofibers using the plasma method for tissue engineering applications. For this purpose, tannic acid-crosslinked gelatin nanofibers were fabricated with electrospinning, followed by treatment with argon and argon–oxygen plasmas in a vacuum chamber. Samples were evaluated by using scanning electron microscopy (SEM), atomic force microscopy (AFM), attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, contact angle (CA) and X-ray diffraction (XRD). The biological activity of plasma treated gelatin nanofibers were further investigated by using fibroblasts as cell models. SEM studies showed that the average diameter and the surface morphology of nanofibers did not change after plasma treatment. However, the mean surface roughness (RMS) of samples were increased due to plasma activation. ATR-FTIR spectroscopy demonstrated several new bands on plasma treated fibers related to the pl

Nanostructure, porosity and tensile strength of PVA/Hydroxyapatite composite nanofiber for bone tissue engineering 2021-03-15

Hydroxyapatite [HAp, Ca10(PO4)6(OH)2] was successfully synthesized using natural minerals, precisely limestone from Druju Indonesia. As a bone scaffold compound, HAp has a weakness of low mechanical properties therefore it needs to be mixed with polymeric materials, such as polyvinyl alcohol (PVA) to improve its mechanical properties. The PVA/HAp composites nanofiber have successfully synthesized using the electrospinning method and analyzed including nanostructure, porosity and tensile strength of nanofiber. The diameter of PVA/HAp composites nanofiber in 173 to 234 nm, porosity in 62 to 74%, and tensile strength in 6.96 to 15.85 MPa. Increasing of HAp cocentrasion increase of tensile strength, SEM showed an increase in HAp concentration (0%−20%) causing a decrease in the average diameter of the fiber. The characteristics of PVA/HAp composite nanofiber can be applied as a scaffold in bone tissue engineering.

Fabrication and assessment of chondroitin sulfate-modified collagen nanofibers for small-diameter vascular tissue engineering applications 2021-03-15

Chondroitin sulfate (ChS) has shown promising results in promoting cell proliferation and antithrombogenic activity. To engineered develop a dual-function vascular scaffold with antithrombosis and endothelialization, ChS was tethered to collagen to accelerate the growth of endothelial cells and prevent platelet activation. First, ChS was used to conjugate with collagen to generate glycosylated products (ChS-COL) via reductive amination. Then, the fabricated ChS-COL conjugates were electrospun into nanofibers and their morphologies and physicochemical characteristics, cell-scaffold responses and platelet behaviors upon ChS-COL nanofibers were comprehensively characterized to evaluate their potential use for small-diameter vascular tissue-engineered scaffolds. The experimental results demonstrated that the ChS modified collagen electrospun nanofibers were stimulatory of endothelial cell behavior, alleviated thrombocyte activation and maintained an antithrombotic effect in vivo in 10-day

Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering 2021-03-13

Bone tissue engineering (BTE) is a rapidly growing field aiming to create a biofunctional tissue that can integrate and degrade in vivo to treat diseased or damaged tissue. It has become evident that scaffold fabrication techniques are very important in dictating the final structural, mechanical properties, and biological response of the implanted biomaterials. A comprehensive review of the current accomplishments on scaffold fabrication techniques, their structure, and function properties for BTE is provided herein. Different types of biomaterials ranging from inorganic biomaterials to natural and synthetic polymers and related composites for scaffold processing are presented. Emergent scaffolding techniques such as electrospinning, freeze‐drying, bioprinting, and decellularization are also discussed. Strategies to improve vascularization potential and immunomodulation, which is considered a grand challenge in BTE scaffolding, are also presented.

Electrospinning new book recommendation：Electrospun Polymers and Composites：Ultrafine Materials, High Performance Fibres and Wearables 2021-03-11

This book reviews the latest technological developments and innovations in electrospun polymers and composites, highlighting the multifunctionality of these ultrafine materials as high performance fibers. The book's chapters investigate a wide range of different electrospinning applications, including drug delivery, tissue scaffolding, fiber reinforcement and nanofiltration, with a particular focus on shape memory effect and the wearable characteristics of electrospun polymers and composites.

Hydrogel Complex Electrospun Scaffolds and Their Multiple Functions in In Situ Vascular Tissue Engineering 2021-03-11

There has been substantial progress in tissue engineering of biological substitutes for medical applications. One of the major challenges in development of complex tissues is the difficulty of creating vascular networks for engineered constructs. The diameter of current artificial vascular channels is usually at millimeter or submillimeter level, while human capillaries are about 5 to 10 µm in diameter. In this paper, a novel core-sheath electrospinning process was adopted to fabricate nanoporous microtubes to mimic the structure of fenestrated capillary vessels. A mixture of polylactic acid (PLA) and polyethylene glycol (PEO) was used as the sheath solution and PEO was used as the core solution. The microtubes were observed under a scanning electron microscope and the images were analyzed by ImageJ. The diameter of the microtubes ranged from 1–8 microns. The diameter of the nanopores ranged from 100 to 800 nm. The statistical analysis showed that the microtube diameter was significant

Fabrication of Nanopores Polylactic Acid Microtubes by Core-Sheath Electrospinning for Capillary Vascularization 2021-03-11

There has been substantial progress in tissue engineering of biological substitutes for medical applications. One of the major challenges in development of complex tissues is the difficulty of creating vascular networks for engineered constructs. The diameter of current artificial vascular channels is usually at millimeter or submillimeter level, while human capillaries are about 5 to 10 µm in diameter. In this paper, a novel core-sheath electrospinning process was adopted to fabricate nanoporous microtubes to mimic the structure of fenestrated capillary vessels. A mixture of polylactic acid (PLA) and polyethylene glycol (PEO) was used as the sheath solution and PEO was used as the core solution. The microtubes were observed under a scanning electron microscope and the images were analyzed by ImageJ. The diameter of the microtubes ranged from 1–8 microns. The diameter of the nanopores ranged from 100 to 800 nm. The statistical analysis showed that the microtube diameter was significant

Controlled drug release from electrospun PCL nonwoven scaffolds 2021-03-11

Currently, electrospun synthetic bioresorbable polymer scaffolds are applied in regenerative medicine and tissue engineering as targeted drug delivery devices because of their mechanical and physico-chemical properties. To control the rate of polymer degradation and drug release from polymer scaffolds, surface modification techniques are widely used. In this study, paracetamol-loaded poly (ε-caprolactone) electrospun fibrous scaffolds were treated by the pulsed electron beam irradiation. Pure control PCL scaffold, as well as scaffolds with four paracetamol concentrations (2 wt./wt. %, 8 wt./wt. %, 16 wt./wt. %, and 32 wt./wt.%) were modified. The mechanical and chemical properties and morphology of modified materials were examined. The sustained release of the model drug over a period of one hour for both non-treated and treated samples was demonstrated. It was shown that treatment leads to an increase in drug release rate and does not change surface morphology of scaffolds and fibers

Electrospun Asymmetric Membranes as Promising Wound Dressings: A Review 2021-03-11

Despite all the efforts that have been done up to now, the currently available wound dressings are still unable to fully re-establish all the structural and functional properties of the native skin. To overcome this situation, researchers from the tissue engineering area have been developing new wound dressings (hydrogels, films, sponges, membranes) aiming to mimic all the features of native skin. Among them, asymmetric membranes emerged as a promising solution since they reproduce both epidermal and dermal skin layers. Wet or dry/wet phase inversion, scCO2-assisted phase inversion, and electrospinning have been the most used techniques to produce such a type of membranes. Among them, the electrospinning technique, due to its versatility, allows the development of multifunctional dressings, using natural and/or synthetic polymers, which resemble the extracellular matrix of native skin as well as address the specific requirements of each skin layer. Moreover, various therapeutic or anti

Electrospinning is used for skeletal muscle engineering materials 2021-03-11

The creation of skeletal muscle tissue in vitro is a major topic of interest today in the field of biomedical research, due to the lack of treatments for muscle loss due to traumatic accidents or disease. For this reason, the intrinsic properties of nanofibrillar structures to promote cell adhesion, proliferation, and cell alignment presents an attractive tool for regenerative medicine to recreate organized tissues such as muscle. Electrospinning is one of the processing techniques often used for the fabrication of these nanofibrous structures and the combination of synthetic and natural polymers is often required to achieve optimal mechanical and physiochemical properties. Here, polycaprolactone (PCL) is selected as a synthetic polymer used for the fabrication of scaffolds, and the effect of protein addition on the final scaffolds' properties is studied. Collagen and gelatin were the proteins selected and two different concentrations were analyzed (2 and 4 wt/vol%). Different PCL/prot

Electrospun Fiber Scaffolds for Engineering Glial Cell Behavior to Promote Neural Regeneration 2021-03-11

Electrospinning is a fabrication technique used to produce nano- or micro- diameter fibers to generate biocompatible, biodegradable scaffolds for tissue engineering applications. Electrospun fiber scaffolds are advantageous for neural regeneration because they mimic the structure of the nervous system extracellular matrix and provide contact guidance for regenerating axons. Glia are non-neuronal regulatory cells that maintain homeostasis in the healthy nervous system and regulate regeneration in the injured nervous system. Electrospun fiber scaffolds offer a wide range of characteristics, such as fiber alignment, diameter, surface nanotopography, and surface chemistry that can be engineered to achieve a desired glial cell response to injury. Further, electrospun fibers can be loaded with drugs, nucleic acids, or proteins to provide the local, sustained release of such therapeutics to alter glial cell phenotype to better support regeneration. This review provides the first comprehensive

In vitro fibroblast migration by sustained release of PDGF-BB loaded in chitosan nanoparticles incorporated in electrospun nanofibers for wound dressing applications 2021-03-11

Migration of fibroblasts into wound area is a critical phenomenon in wound healing process. We used an appropriate system to fabricate an electrospun bioactive scaffold with controlled release of PDGF-BB in order to induce migration of primary skin fibroblast cells. First of all, protein-loaded chitosan nanoparticles based on ionic gelation interaction between chitosan and sodium tripolyphosphate were prepared. Then polycaprolactone electrospun fibers containing chitosan nanoparticles or PDGF-BB-loaded chitosan nanoparticles were prepared. Cellular attachment and morphology of cells seeded on scaffolds with or without PDGF-BB were evaluated by using a fluorescence microscope and scanning electron microscopy. Furthermore, the Arp2 gene, which is involved in cell protrusion formation, showed about three times more expression at mRNA level, in cells seeding on PDGF-BB-containing scaffold compared to cells seeding on scaffold containing only chitosan nanoparticles. Finally, under agarose

Academic News